III. Mount Purple
(See Appendix 2)
Basic
1. Remove tripod camera plate from support.
2. Remove the tripod plate from the mount purple
Loosen the locking lever and press the release button while sliding to
remove
1
3. Attach tripod camera plate to mount purple tripod plate adapter with ¼-20
” and
3/8
th
-16 screws.
4. Attach camera, mounting to either mount purple camera plate, or mount purple
riser camera plate using ¼-20
” and 3/8-16” screws.
5. Mount tripod camera plate to the support.
6. Slide mount purple onto tripod adapter, making sure to press the release button
to allow attachment.
7. Tighten the locking lever.
Without Shoe
1. Remove the tripod plate from the mount purple
a. Loosen the shoe locking lever and press the release button while sliding to
remove
1
2.
Attach camera, mounting to either mount purple, or riser plate using 1/4” and 3/8”
screws.
3. Slide the Mount Purple onto the support, using the dove tail channel on mount
purple.
4. Secure with tripod specific locking system.
Attaching and Removing the Riser Plate
If initially purchased together, the rise plate should come preassembled onto the Mount
purple. In the event that a riser plate needs to be added or removed after purchase,
follow the below instructions.
To Attach:
1. Attach the X riser mounts to the mount purple with logo facing out, using a
standard 1/8” allen key and 4 screws, two per side
2
2. Attach the riser plate to the X riser mounts, using a standard 1/8
th
allen key and
4 screws
3
To Remove:
1. Remove the 4 screws and riser top plate first, using a standard 1/8
th
” allen key
2
2. Remove both X riser mounts, using a standard 1/8
th
” allen key
1
* Make sure the support head is locked before mounting the remaining hardware.
