background image

IMPORTANT! READ AND FOLLOW 

THESE INSTRUCTIONS CAREFULLY 

AND KEEP FOR FUTURE REFERENCE

Introduction

Please read the instructions thoroughly to ensure proper installation.
Please immediately inspect your safety gate upon receipt. If you see any damage, or additional parts are required for this gate, 
do not assemble gate and please go to back page of the instruction booklet for website or Consumer Relations Representative information.
We recommend that you carry out the installation away from young children as some of the smaller components may 
present a choking hazard when loose.

Important Information

There is a gap between your gate frame and handle. This is not a defect. The gap on your gate will close once it is properly mounted. 
Please check the gate on a regular basis to ensure gate and parts are all in proper working order. If the gate is used at the bottom of 
the stairs, please place towards the front of the lowest stair. Ensure the gate is attached between two clean and solid surfaces. 
Ensure appropriate fixings are used for drywall, wood, brick, etc. If wall plugs are provided with the gate and do not secure to the wall 
satisfactorily, consult with a hardware store for your proper wall plug application. If additional parts are required for this gate, please go to 
back page of the instruction booklet for website or Consumer Relations Representative information. Do not use this gate at the  bottom of 
stairs without using all four wall cups. For maximum safety, use 4 wall cups with sticky pads and screws provided when installing the gate 
in all locations.

Disclaimer

Any safety gate which has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, 
environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates any and all claims against the 
manufacturer. Any damage to property during installation of your safety gate is the sole responsibility of the end user.

WARNING!

   WARNING

– Never use with a child able to climb over or dislodge the gate or enclosure.

   WARNING

 Do not use the safety barrier  if any components are damaged or missing

.

   WARNING

– Incorrect installation can be dangerous.

   WARNING

– The safety barrier must not be fitted across windows or similar openings.

   WARNING

– 

Never use without wall cups.

     

Check that the safety barrier is correctly closed.  

    It is manual closing system.

     

To prevent serious injury or death, securely install 

    gate or enclosure. And use according to manufacturer’s
    instructions.

     

Safety barrier should be checked regularly to ensure it is 

    secure and functioning in accordance with these instructions.
    Additional or replacement parts should only be obtained from 
    the manufacturer or distributor.
    Adjust to fit opening between 75cm and 81cm.
    Do not allow older children to climb on or over the 
    gate as this can result in an accident.  

     
    

     

Safety barrier is suitable for use with children up 

    to 24 months of age.
    This product will not necessarily prevent all accidents. 
    Never leave child unattended.
    This safety barrier complies with EN1930:2011.
    This safety barrier is for indoor domestic use only.

     

To clean: Use mild soap and wipe with a damp cloth.

    Adult assembly required.
   

 

Install according to manufacturer’s instructions.

1

WARNING

–Always check that the barrier is properly closed.

WARNING

– Be careful when stepping over the bottom bar.

Cat. No.: 9445587

Summary of Contents for 9445587











Reviews: