6
PROGRAMMING YOUR
COFFEEMAKER
TO BREW COFFEE
1. Turn the Function Knob to the Brew
position.
2. Lift the Flip Switch up to the On position
and release. The red On indicator light will
illuminate and brew cycle will begin.
TO TURN THE COFFEEMAKER OFF
Simply press the Flip Switch down to the
Off position and release.
Note:
To program the coffeemaker to shut off
automatically, see
To program the Variable
Auto Off
instructions below.
PROGRAMMING YOUR COFFEEMAKER
FOR DELAYED BREW TIME
To set the time
1. Turn the Function Knob to Clock.
a.
Hours:
Press and hold the Hour
button to scroll through numbers
quickly. When number displayed
approaches the desired setting,
press and release (pulse) the button
to advance one digit at a time. After
setting the correct hour, the default
will be the last time set unless power
is shut off.
Note:
When the number count passes 12,
the PM light will be displayed on the LCD.
b.
Minutes:
Press and hold the Minute
button to scroll through numbers
quickly. When number displayed
approaches the desired setting,
press and release (pulse) the button
to advance one digit at a time. After
setting the correct minute, the default
will be the last time set unless power
is shut off. To fi nish setting time, turn
the Function Knob to any other setting
or simply wait until the numerals stop
blinking.
To program the Auto On
1. Set the desired Brew-Start time.
a. Turn the Function Knob to Prog.
b. Set the time you want coffee to begin
brewing by using the minute and
hour push-buttons. Follow the same
instructions you used to set the time of
day, in the
To set the time
section above.
2. Turn the Function Knob to the Auto On
position. LCD will display the current time.
3. Lift and release the Flip Switch. The green
indicator light will come on to remind you
that the programming function is in use.
At the programmed time, the red light will
come on as well, indicating that the brew
cycle is starting. Both lights will go off
when keep warm cycle ends.
Note:
To reactivate the auto-on feature to
start brew cycle at the same time another
day, simply lift and release the Flip Switch.
The green auto-on light will illuminate.
To program the Variable Auto Off
1. Turn the Function Knob to the Auto Off
position. Press and hold the Hour button
for 2 seconds. The clock display will start
blinking.
2. Program the coffeemaker to shut off
from zero to four hours after brew cycle
is fi nished by using the Hour and Minute
push-buttons. (See
To set the time
)
Decalcifi cation
Decalcifi cation refers to the removal of
calcium deposits which form over time on the
metal parts of the coffeemaker.
For best performance from your Brew
Central
®
Coffeemaker, decalcify the base unit
from time to time. The frequency depends
upon the hardness of your tap water and how
often you use the coffeemaker. The fl ashing
self clean light will indicate when you should
clean your coffeemaker.
Self Cleaning
If the self clean light begins to fl ash when
the coffeemaker is turned on, it is telling you
that the calcium buildup is interfering with
the functioning of your coffeemaker and
the fl avor of your coffee. To clean, fi ll the
water reservoir to capacity with a mixture
of ¹/³ white vinegar and ²/³ water. Press the
Self Clean button. When the self clean light
glows, turn the coffeemaker on by pressing
the fl ip switch to On. The self clean light will
shine steadily. The coffeemaker is now in self
clean mode. One cycle should be suffi cient
Summary of Contents for Brew Central DCC-1170BK
Page 14: ...10 ...
