ASSEMBLY INSTRUCTIONS
10
STEP 10
-------------------------------------------
Connect Hose & Regulator Assembly to 20lb.LP-gas
cylinder (sold separately).
Line up threads on fitting with those on regulator and
rotate clockwise until tighten. HAND TIGHTEN ONLY.
DO NOT USE ANY HAND TOOLS TO MAKE THIS
CONNECTION. Be careful not to cross threads when
screwing in fitting.
To disconnect the LP-Gas cylinder, first make sure the
cylinder valve is “OFF”.
Then, turn the knob on the regulator counterclockwise
until it is loose.
Warning:
Before connecting, be sure that there is no debris caught
in the head of the LP gas cylinder head of the regulator
valve or in the head of the burner and burner ports.
Check for leaks after connecting the gas cylinder every
time according to the “Checking for Leaks” section on
page 11.
STEP 11
-------------------------------------------
11. Attach strap inside of Cylinder Housing Assembly (G)
to secure cylinder. Then, close door on Cylinder Housing
Assembly (G) to complete installation.
10
11
