STEP 4
-------------------------------------------
Attach Lower Pole assembly (F) to Cylinder Housing
Assembly (G) using M6 x 10 mm bolts (EE),and then put
Beauty Ring (E) through the Lower Pole assembly on top
of Cylinder Housing Assembly (G).
STEP 5
-------------------------------------------
Screw Reflector Spacers (BB) into the top of Burner
Assembly (C).
STEP 6
-------------------------------------------
Feed the valve and gas hose and connect the Burner
Assembly (C) to the Upper Pole (D).
Feed the valve and gas hose into and go through the
Upper Pole (D).
Align the screw holes and secure Burner Assembly (C)
onto Upper Pole (D) with M5 x 8 mm Bolts (DD).
Notes:
a. Open the igniter cap by unscrewing the cap counter
clock wise.
b. Take out the AAA-battery included in
the pack with instruction manual.
c. Insert the AAA-battery to the igniter.
d. Screw the igniter cap back clockwise
M5 x 8 mm Bolt
(x3)
DD
ASSEMBLY INSTRUCTIONS
8
G
EE
E
F
Back
BB
C
DD
C
D
Igniter
Battery
4
5
6
M6 x 10 mm Bolt
(x4)
EE
BB
(x3)
