OPERATION (CONTINUED)
18
•Keep this appliance away from any flammable materials!
•Important - Make sure the propane tank is placed level within the base.
•Should you need to change the gas bottle, confirm the gas supply is turned off at the regulator or bottle /
cylinder valve, and there are no sources of ignition (cigarettes, open flame, sparks, etc.) near before
proceeding.
•Inspect the gas hose to ensure it is free from any twisting or tension. The hose should hang freely with no bends,
folds, or kinks that could obstruct free flow of gas. Always inspect the hose for cuts, cracks, or excessive wear
before use. If the hose is damaged, it must be replaced with a hose suitable for use with propane gas.
CONNECTING TO THE CYLINDER
•Confirm all control knobs are in the off position.
•Connect the regulator to the gas bottle according to your regulator and bottle dealer instructions.
USE INSTRUCTIONS
•Before proceeding, make sure you understand the warnings section of this manual.
•This patio heater shall be used only in a well ventilated space and shall not be used in a building, garage or any
other enclosed area.
•This patio heater may be installed in shelter no more inclusive than; with walls on all sides but with no overhead
cover, within a partial enclosure that includes an overhead cover and no more than two side walls (these side
walls may be parallel, as in a breezeway or at right angles to each other), within a partial enclosure which
includes an overhead cover and three side walls, as long as 30% or more of the horizontal periphery of the
enclosure is permanently open.
ROTATING THE BURNER HEAD
Rotate the swivel lock in an
anti-clockwise direction to
release the rotation bracket.
Rotate the burner head to your
desired position.
Rotate the swivel lock in a
clockwise direction to tighten
the rotation bracket and lock
into position.