9
CLEANING AND
MAINTENANCE
1. Unplug the power cord and allow it to
cool before cleaning.
2. Clean the outer body with a soft cloth
such as a paper towel or microfiber
cloth. Do not immerse the outer body
in water or pour water into it.
3. Remove the sealing ring assembly
from the inside of the lid by grasping
the knob and pulling. Set aside.
4. Remove the pressure limit valve (figure
7) from the lid by gripping and pulling
firmly upwards. Rinse with warm water,
and dry.
5. Rinse the upper and underside of the
lid with warm water, including the air
escape on the underside and the float
valve on top. Dry completely, and
replace pressure limit valve.
6. To clean sealing ring assembly,
carefully remove flexible sealing ring
and clean with a dampened cloth or
micro fiber cloth. Do not use chemical
cleaners. Wash metal plate with warm
water, dry thoroughly and replace
sealing ring.
7. To clean the rubber grommet in center
of sealing ring assembly, carefully
remove it, clean it, and replace it.
8.
Replace sealing ring assembly in lid. BE
SURE KNOB FACES OUT (figure 8).
9. Cooking pot is dishwasher safe. To
hand-clean the pot, use a soft cloth or
sponge and wipe. Be careful not to
damage the inside coating. Never use
harsh chemicals or scouring pads.
10. To clean the condensation
collector, remove and clean it with
warm soapy water, then reinstall it
(figure 9).
11. Any other servicing should be
performed by an authorised service
representative.
8.
9.
10.
