7
PROGRAMMING YOUR
COFFEEMAKER
TO BREW COFFEE
1. Turn the function knob to Brew.
2. Press the on/off button and release. The
red on indicator light will illuminate and
brew cycle will begin.
TO TURN THE COFFEEMAKER OFF
Press the on/off button and release.
Note:
To program the coffeemaker to shut off
automatically, see
To Program the Variable
Auto Off
instructions at right.
PROGRAMMING
YOUR COFFEEMAKER
FOR DELAYED BREW TIME
To Set the Time
1. Turn the function knob to Clock.
a.
Set Hour:
Press and hold the Hour
button to scroll through numbers quickly.
When number displayed approaches the
desired setting, press and release (pulse)
the button to advance one digit at a
time. After setting the correct hour, the
default will be the last time set unless
power is shut off.
NOTE:
When the number count passes 12,
the PM light will be displayed on the LCD.
b.
Set Minutes:
Press and hold the Minute
button to scroll through numbers quickly.
When number displayed approaches the
desired setting, press and release (pulse)
the button to advance one digit at a
time. After setting the correct minute, the
default will be the last time set unless
power is shut off. To finish setting time,
turn the function knob to any other
setting or simply wait until the numbers
stop blinking.
To Program the Auto On
(brew start time)
1. Turn the function knob to Prog.
2. Set the time you want coffee to begin
brewing by using the Minute and Hour
push-buttons. follow the same instructions
you used to set the time of day, in the
To
Set the Time
section at left.
3. Turn the function knob to Auto on. LCD
will display the current time.
4. Press the on/off button and release. The
green indicator light will come on to remind
you that the programming function is in
use. At the programmed time, the red
indicator will come on as well, indicating
that the brew cycle is starting. Both lights
will go off when Keep Warm cycle ends.
NOTE:
To reactivate the Auto on feature to start
brew cycle at the same time another day, simply
press the on/off button and release. The green
Auto on light will illuminate.
To Program the Variable Auto Off
1. Turn the function knob to Auto off. Press
and hold the Hour button for 2 seconds.
The clock display will start blinking.
2. Program the coffeemaker to shut off from
zero to four hours after brew cycle is
finished by using the Hour and Minute
buttons (see
To Set the Time
).
1–4 Cup Setting
The 1–4 cup setting button is used when you
make small amounts of coffee. The 1–4 cup
setting basically double-heats the water, making
your smaller amount piping hot.
To use:
When making a smaller amount, press
the 1–4 button on the control panel after turning
on the unit.
Power Loss Back-up System
one-minute protection in case a breaker trips,
the unit is unplugged, or the power fails. It holds
all programmed information, including time of
day, auto on time and auto off time.
BEFORE FIRST USE
We recommend flushing out your coffeemaker
before first use.
fill the reservoir with cold water and follow the
directions for Brewing Coffee.
DO NOT ADD COFFEE!
once the system flush is complete, your coffeemaker
is ready to brew so you can enjoy Cuisinart at its best!
Summary of Contents for DCC-1100 - Corp 12 Cup Coffeemaker
Page 11: ...11 NOTES ...
