5
TO REMOVE PREP BOWL
1.
Turn the work bowl cover clockwise and
remove.
2.
Turn the work bowl clockwise to unlock
and lift off of the base.
3.
Carefully remove the blade by lifting it up
from the hub.
CLEANING, STORAGE
AND MAINTENANCE
To simplify cleaning, rinse the work bowl, cover,
and blade immediately after each use, so that
food won’t dry on them. Wash blade assem-
bly, work bowl and cover in warm soapy water.
Rinse and dry. Wash the blade carefully.
Avoid leaving blade in soapy water where it may
disappear from sight.
If you have a dishwasher, you can wash the
work bowl and blade assembly on the top rack.
Insert the work bowl upside down and the cover
right side up. Put the blade in the cutlery
basket. Unload the dishwasher carefully to avoid
contact with the sharp blade. Wipe the motor
base clean with a damp sponge or cloth. Dry it
immediately. Never submerge the motor base or
the plug in water or other liquid.
The Mini-Prep
®
Plus Processor stores neatly on
the countertop in a minimum of space. When it
is not in use, be sure to leave it unplugged. The
hidden cord storage underneath the motor base
will help to keep excess cord off the counter-
top. Store the unit assembled to prevent loss
of parts. Store the blades as you would sharp
knives – out of the reach of children.
The Mini-Prep
®
Plus Processor is intended for
HOUSEHOLD USE ONLY. Any service other than
cleaning and normal user maintenance should
be performed by an authorized Cuisinart
®
Service Representative.
TROUBLESHOOTING
Motor doesn't start or blade doesn't rotate.
r$IFDLUIBUQMVHJTTFDVSFMZJOTFSUFEJOUPPVUMFU
r$IFDLUIBUXPSLCPXMBOEDPWFSBSFTFDVSFMZ
locked into place.
r#FTVSFUPQSFTTPOMZPOFPQFSBUJPODPOUSPM
button at a time.
Food is unevenly chopped.
r&JUIFSZPVBSFDIPQQJOHUPPNVDIGPPEBUPOF
time, or the pieces are not small enough. Try
cutting food into smaller pieces of even size
and processing a smaller amount per batch.
Food is chopped too fine or is watery.
r5IFGPPEIBTCFFOPWFSQSPDFTTFE6TFCSJFG
pulses, or process for a shorter time. Let blade
stop completely between pulses.
Food collects on work bowl cover or sides of
prep bowl.
r:PVNBZCFQSPDFTTJOHUPPNVDIGPPE5VSO
machine off. When blade stops rotating,
remove cover, and clean bowl and lid with
spatula.
Food catches on blade.
r:PVNBZCFQSPDFTTJOHUPPNVDIGPPE
Carefully remove blade. Remove food from
blade with spatula, and start over again.
OPERATING TECHNIQUES
With the Mini-Prep
®
Processor you can chop,
grind or purée small amounts of foods. Use this
listing of ingredients and techniques as a basic
guide for processing (Pages 6-7).
Summary of Contents for DLC-2AC SERIES
Page 13: ...13 NOTES...
