4
5
BLENDER JAR ASSEMBLY
To use your Goodful
™
by Cuisinart
®
Blender, begin
by assembling the blender jar.
1. Turn the blender jar (a) upside down and place
it flat on a sturdy surface.
NOTE:
You may need to position the rubber
gasket (b) into the groove of the blade
assembly if not tightly in place.
2. Turn the blade assembly (c) upside down and
place the blade end in the blender jar opening.
3. Twist blade assembly (c) clockwise until
secure.
NOTE:
Blades are sharp. Handle
carefully.
HELPFUL REMINDERS
• Once the cover is in position, additional
ingredients can be added during blending
by simply lifting the measured pour lid,
adding ingredients and replacing the
measured pour lid.
•
Cover should always be in place while the unit
is on.
•
WARNING:
Do not place blender jar on base
while motor is running.
• Do not remove blade assembly from blender
jar when removing blender jar from base.
Simply lift blender jar from motor base.
• Never put boiling liquids or solid frozen foods
(with the exception of ice cubes or ½-inch
(1.3cm) pieces of frozen fruit) in the blender jar.
• Do not put ice, frozen foods or very cold
liquids into a blender jar that has come
directly out of
a hot dishwasher.
• Do not put very hot liquids or foods into a
blender jar that has come directly out of the
freezer. Cool boiling liquids for 5 minutes
before pouring into blender jar.
• Follow Cleaning, Storage and Maintenance
instructions on page 6 prior to your first use.
OPERATION
1. Place the motor base of your Goodful
™
by
Cuisinart
®
Blender on a flat, sturdy surface.
It is important that the surface be clean and
dry. Assemble the blender jar by following
the Assembly instructions. Once the jar is
assembled and is in position on the motor
base, plug the unit into an electrical outlet.
2. Put all necessary ingredients into the blender
jar and replace the cover. You may add more
ingredients by lifting the measured pour lid
and dropping ingredients through the fill area.
Replace the measured pour lid after adding
ingredients. Do not put hands into blender jar
with blender plugged in.
NOTE:
Add liquid ingredients first, then follow
with solid ingredients. This will provide more
consistent blending and prevent unnecessary
stress on the motor.
NOTE:
To remove blender jar cover, lift edge of
cover upward. Lifting measured pour lid will not
remove cover.
3.
Start blending:
Turn dial to LOW or HIGH speed. Blender will
run until dial is turned to OFF.
4.
Pulse mode:
Turn dial to PULSE and alternately “pulse and
release” in short bursts until ingredients have
reached desired consistency.
5.
To crush ice:
The Goodful
™
by Cuisinart
®
Blender motor
is strong enough to crush ice without liquid.
Place ice cubes in the blender jar. Turn dial to
HIGH and run until ice is crushed to desired
consistency. Turn dial to OFF.
6.
To stop blending process:
Simply turn dial to OFF.
7.
To dislodge food:
Use rubber or plastic spatula to help remove
food lodged around the removable blade
assembly. Do not use spatula until you have
turned the blender off. Replace the cover and
FEATURES AND BENEFITS
1. Measured Pour Lid
Allows you to measure and add ingredients
without removing the cover
2.
Cover
Just press down into place. Tight-fitting seal
prevents leakage.
3. 56 oz. BPA-Free Tritan
®
Copolyester
Blender Jar
Has a unique, sturdy, wide-mouth design.
4. High-Quality Blade Assembly with
Patented Stainless Steel Blades
Strong enough for all blending tasks, including
tough jobs like crushing ice and blending
smoothies.
5.
Rotary Dial
Settings for PULSE, OFF, LOW and HIGH
controls.
6. Powerful Motor Base
Plenty of power to handle a wide variety of
blending and food prep tasks.
7.
Slip-Proof Feet
Prevent movement during use and damaging
marks on countertops or tables.
8. Food Processor Pusher Assembly
9. Cord Storage (not shown)
Keeps countertop safe and neat by
conveniently storing excess cord.
10. Food Processor Work Bowl Lid
11. Food Processor Work Bowl
Durable, 3-cup clear plastic work bowl is ideal
for many everyday food prep tasks.
12. Food Processor Chopping/Mixing Blade
Made of ultra-sharp stainless steel.
13. Food Processor Adapter Stem
14. Food Processor Reversible Slicing/
Shredding Disc
Adapter stem attaches disc to work bowl.
*
Tritan is a registered trademark of Eastman Chemical Company.
1
2
5
3
4
6
7
8
10
11
12
13
14
NOTE: Blades are sharp.
Handle carefully.
c.
a.
b.
