5
See image to right for reference. Also be sure the mix-in opening
is centred in the front when in the lock position.
6. Press the Power button to turn the unit on. The red LED light will
be on and the LCD screen will display “00”.
7. Press the Timer button to set the time. Once pressed, the timer
will default to 60 minutes. Press and release timer button to
decrease time in 1-minute increments. Press and hold to scroll
down more quickly.
Note:
Time can be set up to 60 minutes or as low as 10 minutes.
If you added too much time, continue to press Timer and it will
bring you back to ten minutes.
8. Press the Start / Stop button to begin the Mixing / Cooling cycle.
Timer will count down and the blue LED will be on, indicating that
the Mixing / Cooling has begun.
• Ingredients such as chips and nuts can be added towards the
ending of mixing time. Once the dessert has begun to thicken
(about 5 minutes left depending on recipe), add the ingredients
through the mix-in opening.
Note:
To turn the unit off at any time, press the Power button.
This will turn the unit off and reset all the previous functions.
9. The timer will count down to zero and when done, the unit will
beep three times to note the ice cream or gelato is ready.
Note:
The red LED flash and the timer will be blinking “00”.
10. Turn the unit off by pressing the Power button. Remove the lid by
turning it clockwise to unlock. Lift mixing bowl out of the base
with handle. Remove paddle from mixing bowl.
Note:
If the unit is not powered off, it will go into the Keep Cool
function. Details follow on this page.
To pause time and mixing:
• Press the Start / Stop button at any point in the Mixing / Cooling
cycle to pause the time and mixing. To restart, press the Start / Stop
button again to continue.
To add time:
If ice cream isn’t done or you would like to add time, press the
Start / Stop button to pause unit. Add time in 5-minute increments.
Press and hold to scroll through more quickly. If you added too much
time, continue to press timer and it will bring you back to ten minutes.
Note:
When making consecutive batches of ice cream or gelato, be
sure to allow extra time for the compressor to adjust to cooling.
Tip:
Unplug unit and let it rest for 10 minutes to allow for unit to cool
before making a second batch.
Keep Cool
This function does exactly what it says….keeps cool! After the Mixing /
Cooling cycle is finished, the unit will go to Keep Cool.
Once your Mixing / Cooling time has finished the timer will blink “00”.
The unit is now in the Keep Cool function and has a 10-minute wait
period. After 10 minutes elapse, the compressor will come on and the
display will flash “COOL”. The Keep Cool is a 10-minute cycle. When
done, the unit will beep 5 times to note the cycle is finished. The unit
will shut off and go into Standby mode.
Note:
The mixing is not activated during the Keep Cool function. If you
would like to mix as well, turn off the unit to reset the functions.
Note:
You can turn the unit off at any time during Keep Cool.
SAFETY FEATURE
The Cuisinart
®
Ice Cream & Gelato Maker is equipped with a safety
feature that automatically stops the unit if the motor overheats. This
safety system may activate under heavy loads, if the unit has been
running for an excessively long period of time, or if added ingredients
(nuts, etc.) are in extremely large pieces. To reset the unit, press the
Power button and unplug the unit. Let the unit rest. After a few minutes,
you may turn the unit on again and continue making the dessert.
CLEANING, STORAGE AND MAINTENANCE
Cleaning
Clean the mixing bowl, mixing paddles and lid in warm soapy water.
Mixing paddles and lid are top-shelf dishwasher safe.
DO NOT PUT
MIXING BOWL IN THE DISHWASHER. DO NOT CLEAN WITH
ABRASIVE CLEANSERS OR IMPLEMENTS.
Wipe motor base clean
with damp cloth. Dry all parts thoroughly.
Storage
Be sure to store your unit in an upright position. Do not store frozen
desserts in the mixing bowl in the freezer for more than 30 minutes at
a time. Transfer frozen desserts to a freezer-safe, airtight container for
longer storage in the freezer.
Maintenance
Any other servicing should be performed by an authorised service
representative.
Summary of Contents for ICE-100XA Series
Page 2: ......