11. Be careful when heating small amounts of oil - do not set a high performance level.
If you do, the oil could ignite and catch fire!
12. NEVER operate the appliance on a metal table or other metallic surface. This may
heat up and thereby lead to a fire or the appliance itself could be damaged beyond
repair.
13.
Do not place metallic objects such as knives, forks, spoons, lids, cans and aluminum
foils on the top plate.
14.
Never use the unit on low-heat-resistant materials (carpet, vinyl).
15.
Do not place a sheet of paper between the pot or the pan and the unit. The paper may
get burnt.
16.
Do not place on or near a hot gas or electric burner, or in a heated oven.
17. Do not operate the appliance via an external time-switch or a separate remote
control system.
18. Maintain a minimum distance of 1 meter to appliances that are sensitive to
electromagnetic fields (e.g. computer screens, clocks, magnetic storage media,
and electronic devices).
19. Medical-technical devices such as heart pacemakers, hearing aids and other
appliances may possibly need to be kept at a greater distance. If in doubt, consult
the manufacturer of the appliance!
20.
The use of accessory attachments not recommended by the appliance manufacturer
may cause injuries.
21.
Do not use outdoors, household use only. Clean Cook-Top with Caution – If a wet
sponge or cloth is used to wipe spills on a hot cooking
area, be careful to avoid steam
burn, some cleaners can produce noxious fumes if applied to a
hot surface.
22.
Clean Cook-Top with Caution – If a wet sponge or cloth is used to wipe spills on a hot
cooking
area, be careful to avoid steam burn, some cleaners can produce noxious
fumes if applied to a
hot surface.
SPECIFICATION:
Ⅱ
Item number: ICT200
Power Rate: 1600W
Voltage:120V
Operating Frequency: 60Hz
Working Frequency: 18kHz
～
40kHz
III Items supplied
The appliance is delivered with the following components as standard:
▯
Induction cooker plate
▯
Operating Instructions
1) Remove all parts of the appliance and the operating instructions from the carton.
2) Remove all packing material
