IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a
Cuisinart
®
Premier
™
Series
Food Processor, and the
standard parts for it:
PowerPrep
®
metal dough
blade, metal chopping
blade, slicing disc,
shredding disc, detachable
stem for discs, spatula,
recipe and instruction
books, and how-to video.
CAUTION:
THE CUTTING TOOLS
HAVE VERY SHARP
EDGES.
To avoid injury
when unpacking the
parts, please follow
these instructions:
1. Place the box on a low
table or on the floor
next to the kitchen
counter or table where
you intend to keep the
food processor. Be
sure the box is right
side up.
2. Open top flaps and
remove the cardboard
insert. You will see a
rectangular block of
plastic foam that holds
the processor parts,
each fitted into a cavity
of the foam.
3. The PowerPrep
®
metal dough blade (A)
and detachable stem
for the discs (B) are in
cavities on one short
side of the foam block.
Remove them first.
4. The plastic spatula (C)
is on the adjacent long
side of the foam block.
Remove it next.
5. The slicing disc (D)
is on the edge of one
of the long sides of
the foam block; the
shredding disc (E)
is on the other side.
Slide them out of their
grooves WITH GREAT
CARE; THE BLADES
ARE VERY SHARP.
6. Only the work bowl
cover (F) and pusher
assembly (G) now
remain in the foam
block. Grasp an edge
of the work bowl cover
and pull it straight up.
The pusher assembly
will slide away from the
work bowl cover and
remain in place. Lift it
straight up to remove.
7. Lift out the foam block.
8. Remove the instruction
book.
9. Lift out the video
from its space in the
cardboard frame on
one side of the box.
Then lift out the
cardboard frame.
10. The housing base and
work bowl with metal
blade are at the bottom
of the box. The metal
blade is loose in the
work bowl. Do not turn
over work bowl without
first removing metal
blade.
11. Remove the base
and bowl together
by grasping the plastic
bowl at the top with
both hands and lifting
the bowl straight up.
Do not rotate the bowl
clockwise on the base.
This will cause the
bowl to separate from
the base.
12. Place the food
processor on a
counter or table and
read the instructions
thoroughly before using
the machine.
13. Save the shipping
cartons and plastic
foam blocks. You may
want to use them at a
later date.
Please watch the
enclosed how-to video
before using the food
processor.
NOTE: Remember to
return your completed
warranty card with all
information carefully
filled out.
WHEN
REMOVING BLADE:
CAREFULLY REMOVE
THE METAL BLADE BY
GRASPING THE
CENTER WHITE HUB
AND LIFTING IT
STRAIGHT UP.
NEVER TOUCH THE
BLADES, AS THEY
ARE RAZOR SHARP.
2
02CU13445 DLC-2011 IB REV 8/4/03 1:50 PM Page 3