11
Fitting
&
Removing The Plates
Fitting the Plates
n
Ensure the appliance is switched off and is fully cooled down.
n
Select either the waffle or pancake plates.
n
Position the appliance so that the controls are facing towards you.
n
Press the handle release button and list the handle to fully open the
product.
n
Align the two cut outs at the back of the plate (see Fig. 1) with the
brackets on the bottom of the housing base. Tilt the plate and slide it
underneath the bracket.
n
Push down the front end of the plate until it locks into place. To lock the
plate more easily, its recommended to press the plate release button,
when fitting the plate.
n
Repeat with the second plate.
Removing the Plates
n
Ensure the product is switched off and is fully cooled down. Always allow
the appliance to cool for at least 30 minutes
before removing the plates.
n
Locate the plate release buttons, which can be
found on the right side of the units upper and
lower housing (see Fig. 2). Press the upper release
button firmly, the upper plate will slightly loosen
to be able to remove from the top cover. Lift the
plate up and slide out, under the brackets in the
Positioning guides
Positioning guides
Fig. 1
Waffle Plates
Pancake Plates
Fig. 2
Upper
Plate
Release
Button
Lower
Plate
Release
Button
Summary of Contents for WAF2U
