THIS PRODUCT IS FOR HOUSEHOLD USE ONLY
OPERATING INSTRUCTIONS
Before using for the first time wipe unit clean with a damp cloth. Dry thoroughly.
Set unit on highest setting and heat unit to remove any manufacturing residues.
Place unit on a smooth flat counter top surface. Be sure temperature control
knob is in “off “ position. Plug in. Set burner(s) at desired temperature, low,
med, high.
The temperature/power indicator light will illuminate and stay illuminated until
the temperature setting has been reached. It will then cycle on and off until the
unit is turned off or unplugged.
Allow burner to preheat approximately minute before placing cookware on the
burner.
Use only cookware with FLAT bottoms. This unit will work with all types of
cookware. For best results it is recommended to use cookware that matches
approximately the size of the burner surface(s).
Use the burner(s) as you would use a normal cooking range.
When finished turn heat control to “Off” and unplug.
CAUTION
Never operate the unit in a tilted position.
Do not leave unit unattended.
Never leave unit plugged in when not in use.
Always place cookware on the center of the burner..
Never allow power cord to hang over counter edge.
Always allow 6 inches clearance on top and sides of the unit.
Always use away from flammable material and other heat sources.
Care and Cleaning
To clean: Turn unit off and unplug. Allow unit to cool completely.
Wipe unit with a soft damp cloth.
NEVER IMMERSE UNIT IN WATER.
Do not use steel wool pads or abrasive cleaners on the burner as they may scratch
or damage the finish
