INSTALLATION, OPERATION & MAINTENANCE
Culinaire Warming Drawers CWD2.1/1
Revision Date:18/04/2012
Tel: 1300 79 1954 Web: www.stoddart.com.au Email: fse@stoddart.com.au
Version 3
Due to continuous product research and development, the information contained herein is subject to change without notice
Page 10
WARNING!
Do NOT overload the power supply. See the rating label for the power, voltage and
current supply.
WARNING!
This unit MUST be installed in accordance with AS/NZS 60335.1
and complies with local laws
Electrical
Power Supply
The appliance is supplied with a 3-core, 240 Volt, 10 Amp, 2.3m flexible power cord with a standard 3 pin
plug.
Before connecting to the power supply, check with a
qualified technician
that the power supply from
the wall socket is correct for this unit.
Check the power cord and plug for damage before inserting into the wall socket. If damaged,
do NOT
switch ON
and contact the distributor or manufacturer for repair or replacement.
Ensure that the POWER switch is in the
OFF position
before connecting the power supply.
The power supply should be plugged directly into a dedicated wall socket,
NO
extension cords or
multi-boxes
should be used.
•
Ensure that the power cord is placed out of the harms way and cannot be damaged when the unit is in
operation.
Grounding
•
All electrical wiring in the appliance is correctly grounded when leaving the factory.
Summary of Contents for CH.CWD2.1/1
Page 2: ......
