Important Information about your Culligan Water Filter System
Please fill in the information below for future reference� If you have any questions regarding your Culligan water
system, please contact the dealer that installed your system for assistance�
Addition information may also be found by visiting:
System and Dealer Identification
System Name
Model Name:
Control Valve Model #
Control Valve Serial #
Date of Installation:
Tank Serial #
Culligan Dealer:
City/Town:
Dealer Phone #
State:
System Settings
Time of Reconditioning Cycle
AM/PM
Recommended Culligan Service Interval:
Gallons Capacity Per Reconditioning:
Annual:
Bi-Annual:
Day Override / Interval:
Replenish Neutralizing Media (Cullneu only)
Media Life (estimated):
Owner Maintenance:
Replace Cartridge Filter(s)
Replenish chlorine solution (Sulfur-Cleer only)
Water Analysis
Hardness ____________________ grains/gallon
Total Dissolved Solids - TDS ______________________ mg/l
pH level (acidity) _____________________ S�U�
Alkalinity _______________________________ grains/gallon
Iron _______________________________ mg/l
Manganese __________________________________ mg/l
Chlorine ____________________________ mg/l
Hydrogen Sulfide (H
2
S)_____________________________ mg/l
Nitrate _____________________________ mg/l
Sodium_____________________________________
mg/l
Arsenic _____________________________ mg/l
Chloride____________________________________
mg/l
NOTE!
mg/l (milligrams per liter) and ppm (parts per million) are equivalent units of measurement 1 grain = 17.1 mg/l
29
01040707 B 07/21
Records & Data