36
01023052
The following information can be displayed at the control valve or remote display. These settings are read-
only. Press
or
to scroll through the settings. Press
to view the previous setting.
Screen Display
Range
Setting Description
SOFTENING
JAN-01-12 12:01P
N/A
1. From the HOME screen, press
to view the main menu.
>1)INFORMATION
2)MANUAL MODE
1–6
2. The screen displays the main menu. Press
to select
1)INFORMATION.
SALT TANK LEVEL
OK
OK,
Low
3. If a Salt Brine Tank is installed, this screen displays the
salt level. The status is OK unless the SBT probe detects
low salt level. If the screen displays LOW a subsequent
screen displays APPROX DAYS OF SALT REMAIN-
ING. Press
to select the next information screen.
REMAIN CAPACITY
100%
0–100
4. The screen displays the softening capacity remaining,
displayed as a percentage of the total capacity. During
manually initiated regeneration, assume 0 percent re-
maining capacity. Press
to select the next informa-
tion screen.
REMAIN CAPACITY
740 GAL
0–no
limit
5. The screen displays the softening capacity remaining,
measured in gallons (liters). Press
to see the next in-
formation screen.
CURRENT FLOWRATE
0.0 GPM
0–no
limit
6. The screen displays the current flow rate, measured in
gallons (liters) per minute. Press
to see the next infor-
mation screen.
TODAY’s USAGE
0 GAL
0–no
limit
7. The screen displays today’s water usage, measured
in gallons (liters). Press
to see the next information
screen.
AVERAGE DAILY
300 GAL
0–no
limit
8. The screen displays average water usage for this config-
uration. Press
to see the next information screen.
NEXT REGEN ON
JAN-03
N/A
9. The screen displays the date of the next regeneration,
based on average daily water usage. Press
to see
the next information screen.
Information
