Flow Rate
This display will only show if the flow meter is attached
to the control. The display shall show the current flow
rate of the water passing through the control. The
display will show “FLO” for two seconds and then the
current flow rate passing through the flow meter until a
key is pressed.
This display shall never time out, as opposed to the
rest of standard statistics
(10 minutes).
Capacity Remaining (gal/ L)
This display will only show if the flow meter is attached
to the control. The display shows the gallons or liters
of capacity remaining in the batch before regeneration
will be triggered. The display will show “GALr” (“Litr” for
metric) for two seconds and then display the remaining
capacity. When reaching “0” the display will remain at
“0” and not show negative values.
This display shall never time out, as opposed to the rest
of standard statistic
(10 minutes).
Number of Regenerations in Last 14
Days
This display will show the number of regenerations
that have occurred in the last 14 days. The display will
first show “14dY” for two seconds and then display the
number of valid regenerations that have occurred.
Number of Days since Last
Regeneration
This display shows the number of days that have
elapsed since the last regeneration. The display will
show “dAYS” for two seconds and then the number of
days that have elapsed since the unit completed its
last valid regeneration.
Service Check
(cont.)
21
