1. Safety
PNEG-240
Chain Feeding System
7
Maintain Equipment and Work Area
•
Understand service procedures before doing work. Keep area
clean and dry.
•
Never service equipment while it is operating. Keep hands, feet,
and clothing away from moving parts.
•
Keep your equipment in proper working condition. Replace worn
or broken parts immediately.
ST-0003-1
Operate Motor Properly
•
All electrical connections must be made in accordance with
applicable local codes (National Electrical Code for the US,
Canadian Electric Code, or EN60204 along with applicable
European Directives for Europe). Make sure equipment and
bins are properly grounded.
•
Lock-out power before resetting motor overloads.
•
Do not repetitively stop and start the drive in order to free a
plugged condition. Jogging the drive in this manner can damage
the equipment and drive components.
ST-0009-3
Stay Clear of Moving Parts
•
Entanglement in rotating sprocket or moving
chain will cause serious injury or death.
•
Keep all guards and covers in place at all times.
•
Lock-out power source before making
adjustments, cleaning, or maintaining
equipment.
ST-0017-1
