© 2013 Cummins-Allison Corp.
45
Align and justify documents
to the wide horizontal edge.
6.
When processing checks, press
CRNCY
on the main screen and then press
CHECK
.
7.
Press
ADD
on the main screen to accumulate batch totals if desired.
8.
Prepare documents for processing, as described below:
•
Ensure documents are unfolded and neatly stacked.
•
Align and justify documents to the wide horizontal edge.
•
Facing and orientation are not required.
•
When processing checks, raise the adjustable hopper guides.
•
Place documents in the hopper with the horizontal and justified edge toward the feed opening.
This reduces the risk of feed errors and no calls.
9.
The machine processes the documents.
If the machine stops due to an error, read the instructions on the main screen. For more
Stopping Conditions and Recovery Steps
10.
The machine adds the value of all documents processed, provides a total, and stops automatically
after the last document in the hopper is read. The batch is ended when documents are removed from
the pocket. If the
ADD key
is
ON
, press
END
to end the batch, restart the count, and begin the
next batch.
The ADD Key and Sub-Batches
A sub-batch is a deposit processed from one or several sources and treated as sub-groups within
a batch. This memory level tracks documents within a sub-batch.
To accumulate sub-batches, ensure SBAT ENABLE is
ON
in
SETUP
and
ADD
is selected on
the main screen.
To end the batch when processing is complete, remove documents from the pocket and press
END
twice: once to end the sub-batch and once to end the batch.
Machine is auto-start capable. Feed rollers in hopper rotate inward.
Entanglement and drawing-in hazard.
Do not operate with exposed long hair, neckties, jewelry or loose clothing.
Summary of Contents for JetScan iFX i100
Page 1: ...JetScan iFX i100 Scanner Operating Instructions for All Models ...
Page 121: ......
