Stopping conditions and recovery steps |
Single-pocket JetScan
®
currency scanner
| 19
Raise the two red plastic “T” handles at the same
time and hook them onto the metal shaft. Next, do
any of the following:
• Move jammed notes by turning the large black
feed rollers forward (direction of note flow). This
action moves other shafts and rollers while
sending dirt or stray material out of the unit.
• Press
FWD
to slowly move the feeder forward.
• Press
REV
to slowly move the feeder in reverse.
Remove all jammed notes and foreign material.
Unhook the two red plastic “T” handles from the
metal shaft and lower them at the same time.
Replace the feeder plate. Insert the curved edge of
the feeder plate first. Gently press down on the
feeder plate until it snaps into position.
Replace the hopper extension and press
CONT
.
Reprocess all notes that were in the hopper and
pocket at the time of the jam.
5
4
6
Curved edge
7
