7
5
1
2
33
Avoid pinching
the wires
44
63
48
59
5. While another person holds the Upright (2) near
the Frame (1), connect the Upper Wire (44) to
the Lower Wire (63).
Insert the excess wire downward into the Frame
(1).
Tip: Avoid pinching the wires.
Slide the
Upright (2) onto the Frame (1).
Attach the Upright (2) with two M10 x 68mm
Button Bolts (48), two M10 Split Washers (59),
and two M10 Locknuts (33).
Do not tighten the
Button Bolts yet.
4. While another person holds the Console (23)
near the Upright (2), connect the console wire
to the Upper Wire (44). Then, insert the wires
into the Upright.
Tip: Avoid pinching the wires.
Attach the
Console (23) to the Upright (2) with four M6 x
12mm Screws (43).
4
23
2
44
Console Wire
43
Avoid pinching
the wires
