14
H
2
O
fig.4.
fig.5.
Be careful not to overturn the
hood during transport!
fig.6.
KCR835AS-A5-CP
KCR835ASA5CP
Transport
Fig.4.
fitted with personal protection equipment, transport the appli-
ance to the installation location.
use suitable equipment, capable of dealing with its weight:
persons not involved with the appliance installation may not
pass through or stand in the work area during the appliance
assembly.
During the transport, pay particular attention to passing
through openings and/or doors.
Preliminary operations
Fig.5.
Carefully remove the protective film.
If any glue residue is left on the surfaces, remove it with soapy
water but without any corrosive or abrasive products or sharp
or pointed instruments.
Check that all the parts making up the hood are in good
condition and without any faults or breakages, if that is not
the case, contact the Dealer for the procedures to follow.
Serial number plate reading
Fig.6.
The serial number is on the back of the appliance.
It provides important technical information that is vital in case
of a request for maintenance or repair of the appliance: please
do not remove, damage or modify it.
There are two hood variations:
•
neutral
: they only collect steam from the oven but do
not have an aspiration motor or control panel. They are
usually connected to a pre-existent exhaust system.
•
ventilation
: steam suction and exhaust from oven by a 5 dif-
ferentiated speed motor controlled by a front control panel.
Installation
Model
Voltage
absorption
Year of production
serial number
