Name | model
Curly’s Ag –
Agricultural Innovations | www.curlysag.com | info@curlysag.com
Hand-E | 2022 MODEL
P a g e |
8
Step 3
–
Flame Head Installation
Make sure the flame head
(D)
is sitting in the opposite direction to the gas bottle
Holder (as they counter act each other's weight to give stability to your
Incinerator
Multi
).
Undo and remove the nut and washer from the bolt on the Flame Head (near the
adjuster)
Insert the Flame Head
(D)
into the predrilled hole on the bottom of the Main
Frame / Gas Bottle Attachment
(A).
Replace the washer and nut and tighten.
Use a shifting spanner and/or a socket spanner to tighten the nut. Hold the
bolt from the other side when tightening the nut.
D
A
D
A
D
A
