background image

We call it the

“Ballista” because it launches the bass energy into

the room instead of merely pushing air into the room.
You will not only hear the bursting rich bass but your body will
feel the resonating forceful sound pressure.

A Ballista was a weapon used by the Greeks and Romans to
throw large projectiles at the enemy. The FLSUB Ballista uses
the same principles in design to unleash the bass into the room.

The

Ballista’s reproduction of low frequencies are enhanced by

the front slotted port Bass Reflex design with vinyl coated MDF.
The FLSUB is the perfect unit for custom cabinetry.

The woofer is made of a long lasting heavy-duty mica filled
paper pulp with a strong butyl rubber surround.

The amplifier is the brains of the system and has all the latest
features including: RCA low level Line Input, high level left/right
spring loaded Speaker inputs, high level pass through Speaker
outputs, Auto On Switch, a Phase control switch, variable
Subwoofer Level control and a variable Crossover Frequency
control.

The color is Black Ash easy maintenance vinyl.

The FLSUB is truly your best complement to any Home Theater.

With the Ballista you are assured years of explosive realistic
sound and superior trouble free operation.

Floor Standing Powered 

Bass Reflex Subwoofer

The “Ballista”

FLSUB10 and 12 Series  

User’s Installation Guide

www.currentaudio.com

©2009 Current Audio LLC 

1830 John Towers Avenue  El Cajon, CA 92020   Sales 866-927-7181

SPECIFICATIONS FL SUB

FLSUB10

FLSUB12

Woofer

10” Heavy Duty Mica Filled Paper Pulp Cone 12” Heavy Duty Mica Filled Paper Pulp Cone

Surround

Butyl Rubber

Butyl Rubber

Frequency Response (with Fixed High Pass Cut Off)

25Hz-250Hz

22Hz-200Hz

Variable Low Pass Crossover 

40-150Hz

35-150Hz

Power handling

175 Watts <2% THD

250Watts <2% THD

SPL @ 1 Watt/1 meter  @ 30Hz

112db

116db

Input

RCA and High Pass Output @75Hz

RCA and High Pass Output @75Hz

Height X Width X Depth  (Approximate)

17.2"(437mm)x 12.9"(328mm)

X 19”(483mm)

Coming Soon

Weight

44lbs (20kg)

Part Number

92053  FLSUB10
92052  FLSUB12

Manual URL

www.currentaudio.com

Accessories   

ILS120  In-line Surge Protector
FIT, FITFL, WS, CS Loudspeakers

Specifications subject to change without notice.

FLSUB  RPA 072710

Page 1

Summary of Contents for Ballista FLSUB10 Series

Page 1: ...ver Frequency control The color is Black Ash easy maintenance vinyl The FLSUB is truly your best complement to any Home Theater With the Ballista you are assured years of explosive realistic sound and superior trouble free operation Floor Standing Powered Bass Reflex Subwoofer The Ballista FLSUB10 and 12 Series User s Installation Guide www currentaudio com 2009 Current Audio LLC 1830 John Towers ...

Page 2: ...walls you can get a more uniform axial mode cancellation Place the FLSUB in a well ventilated area to take advantage of its massive heat sink for cooling A fan may be required if placed in a cabinet If installed in a cabinet place the front edge of the FLSUB as far forward as possible Do Not push toward the rear of the enclosure Do Not obstruct the woofer or the slotted port This will affect the s...

Page 3: ...fied Initially set it at mid range then adjust up or down for the best response for your room When using LFE out adjust fully clockwise PHASE The PHASE switch is either 180 or 0 This control allows you to minimize the unwanted destructive acoustic interference when the main speaker low frequencies overlap that of the subwoofer Toggle the switch to find the best sound with audible bass INPUT POWER ...

Page 4: ...d Cable Improper or No Ground PreWire Cable Ran Too Close to AC Wires Push in RCA Cable Completely Replace Cable Check With Plug Tester Reverse Cord Insert Isolation Transformer In line with RCA Hum from Sub When Receiver Off Subwoofer Level Set Too High Sub Set to Constant ON Cable TV Ground Not Same as Earth Ground Ground Loop Turn Subwoofer Level Down Turn POWER Switch to Auto Insert In line Gr...

Reviews: