17
5.1 Technical information
5. SPECIFICATION
Dual, isolated between channels
01
02
03
04
05
06
07
08
09
10
11
12
13
Channel
Power Supply
Pulse Amplitude
Pulse Rate
Pulse Width
Voltage
Wave Form
Size
Weight
Timer
Burst (B)
Normal Mode
(N)
Modulation 1
mode (M1)
One 9 Volt Battery
Adjustable,0-80 mA
peak into 500 ohm load each channel
Adjustable, from 2 to 150 Hz
Burst rate: 0.5Hz (Burst mode)
Adjustable,
from 30 to 260 microseconds
0 to 40 V (Load : 500 ohm)
Mono-phase square pulse wave
11.7cm(L) x 6.6cm(W) x 28.5cm(H)
94 g (without battery)
15, 30,60 minutes or Continue
Bursts occur twice very second.Pulse
width(adjustable), pulse
rate = 100 Hz, Burst rate=0.5Hz
The pulse rate and pulse width are
adjustable. It generates continuous
stimulation based on the setting value.
Modulation 1 mode is a pulse width
modulation. The pulse width is
automatically varied in a cycle
pattern over an interval of nominally
10 Seconds. Pulse width increase
over a period of 5 seconds from 30
us to the control setting value, then
decreases over a 5 seconds period
to its original value (30 us). The cycle
is then repeated.
Mechanism
Technical description
Summary of Contents for InTENSity 5000 Hybrid
Page 1: ...INSTRUCTION MANUAL ...