3
B E N D I N G
B E N D I N G
FEATURES
• Sturdy steel construction for rugged use.
• Convenient T-handle and durable wheels for easy mobility.
• T-handle can be stowed on the carriage to save space during storage.
• Fits through a standard 32" doorway.
• Includes an adjustable spring to set the drag required and to prevent over-feeding.
OPERATING INSTRUCTIONS
1. Un-pin the T-handle from its stowed position on the carriage (see Figure 3)and insert
it into the T-handle receiver on the end of the cart. Re-pin the handle (see Figure 3A).
2. Place the coil of wire or cable onto the turntable with the wire or cable unwinding
from the outside of the dispenser. Remove all ties or straps from the coil.
(For Romex
®
*, remove from box and place onto turntable).
3. Set the desired drag on each turntable by adjusting the hex nut at the top of the spring.
4. Position the cart so that the wire or cable is dispensed from the side of the cart.
NOTE: If you are only dispensing one coil of wire or cable, you can use either
turntable and it can be loaded for use in either direction.
HANDLE PIN
TURNTABLE DRAG
ADJUSTMENT NUT
TURNTABLE
T-HANDLE SHOWN IN
STOWED POSITION
HANDLE PIN
FIGURE 3
FIGURE 3A
*
Romex is a registered trademark of Southwire Company, LLC.
