www.current-usa.com
PAGE 5 of 6
Program moonlight color spectrum
1. Press Moonlight
2. Press any of the pre-programmed color spectrums and customize the color and intensity
using the adjustment buttons until your desired color spectrum is acheived.
Please see page 6 for moonlight color spectrum specifications and recommendations.
3. When the desired moonlight color spectrum and intensity is reached, press Moonlight
and hold for 5 seconds. Light will blink, indicating the moonlight color spectrum is now stored
in memory. Press the RESUME key for light to go back into normal programming mode.
Moon
Light
Moon
Light
Customized on-demand color spectrums
1. Press M1 or M2 (memory locations)
2. Press any of the pre-programmed color spectrums and adjustment keys
until your desired color spectrum is acheived. Press M1 or M2 for 3 seconds. The light will
blink, indicating color is stored in memory.
3. Press M1 or M2 at any time to view your aquarium under your custom color spectrum. To
exit the custom color and put the light back in timer mode, press Resume
M1
M1
M2
On-demand dynamic modes
1. Press any of the dynamic modes on-demand
2. To exist the dynamic mode and put the light back in timer mode, press Resume
Please note: these modes are recommended as on-demand only and cannot be incorporated into a
programmed lighting schedule.
RESUME
Controller Tips
The controller features an integrated IR (infrared) sensor which recieves signals via the IR wireless
remote. The remote will work up to 30 ft. away from the controller, however it is best to ensure there
is a clear “line of sight” between the remote and controller when programming or using dynamic lighting
modes.
Many other home electronics use IR technology for control (such as your television TV). If you notice
your light changing colors or time schedule changing, ensure your other electronics are not interfering
with it (i.e. place the controller in a different location around the aquarium or under the stand).
Note: The RESUME key can be used as a toggle between timing mode and color/dynamic modes.
Please ensure to press RESUME whenever you want the light to go back into the normal timing mode.
M2
M2
M1
Programming Instructions cont’d
RESUME
RESUME
RESUME