background image

34

35

WARRANTY INFORMATION

LIMITED WARRANTY

Current Products Corp. (the “Manufacturer”) hereby warrants to Customer 
that the Smart Wand™ (the “Product”) is and will remain for a period of one 
(1) year from the date of delivery to Customer as evidenced by Customer’s 
proof of purchase (the “Warranty Period”), free of defects in materials and 
workmanship, provided that the Product used for its intended purpose 
and is properly serviced in accordance with the User’s Manual provided to 
Customer.  Subject to the foregoing, if at any time during the Warranty Period 
the Product fails to conform to the foregoing warranty by reason of defects in 
materials or workmanship, Customer shall promptly notify Manufacturer in 
writing, and Manufacturer at its option shall repair or replace the defective 
Product or component part without charge to Customer, except for:  (A) 
costs incurred in transporting the Products or component parts to and from 
Manufacturer’s designated dealer or its manufacturing plant; and (B) charges 
for labor or other costs incidental to the removal or remounting of component 
parts repaired or replaced under this Warranty, both of which shall be borne 
by Customer.  Notwithstanding any provision herein to the contrary, this 
Warranty shall not extend or obligate Manufacturer to take any action with 

respect to:  (i) Products which have been modified, altered, installed, used or 

operated in a manner which is not recommended by Manufacturer, including 
any Products in which parts not manufactured or approved by Manufacturer 
have been installed; (ii) Products which have not been regularly and properly 
serviced in accordance with the User’s Manual or which have otherwise been 
neglected; and (iii) ordinary wear and tear, service and maintenance and 
replacement items; (iv) the Product has been used, or attempted to  be used, 
for other than the customary usage or for other than the Product’s intended 
use; (v) the Product has been subject to mishandling, misuse, or abuse; (vi) 
the product has suffered damage resulting from lightning, power surges, 

vandalism,  fire,  earthquake,  acts  of  nature,  or  any  other  cause  which  the 

product was not designed to withstand; or (vii) damage to the Product cause 
by battery decay or corrosion.

This Limited Warranty extends only to the original owner. This Limited 
Warranty is not transferable. This Limited Warranty does not cover normal 
wear or tear or deterioration which occurs with the passage of time. 
Batteries originally provided with a new product, if any, are produced by a 
third party and are not warranted by Manufacturer. No employee, distributor, 
dealer, agent or representative is authorized to change the terms of this 
Limited Warranty in any way, to extend the warranty time periods, or to 
grant additional warranties, and no attempt to do any of the foregoing will be 
binding upon Manufacturer.

LIMITATION OF LIABILITY

EXCEPT AS SPECIFICALLY STATED IN THE PARAGRAPHS 
IMMEDIATELY ABOVE, MANUFACTURER MAKES NO WARRANTY OR 
REPRESENTATION, EXPRESS OR IMPLIED, INCLUDING, WITHOUT 
LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE.  THE WARRANTY SET FORTH ABOVE 
AND THE OBLIGATIONS AND LIABILITIES OF MANUFACTURER 
THEREUNDER REPRESENT CUSTOMER’S SOLE AND EXCLUSIVE 
REMEDIES AND ARE EXPRESSLY MADE IN LIEU OF ANY AND ALL 
OTHER REMEDIES, WARRANTIES, GUARANTIES OR LIABILITIES, 
EXPRESS OR IMPLIED, ALL OF WHICH ARE HEREBY EXPRESSLY 
WAIVED BY CUSTOMER.   THERE ARE NO WARRANTIES WHICH 
EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.  IN 
NO EVENT SHALL MANUFACTURER’S LIABILITY HEREUNDER 
EXCEED THE PURCHASE PRICE FOR THE PRODUCTS, NOR SHALL 
MANUFACTURER BE LIABLE FOR ANY SPECIAL, INDIRECT, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE 
WHATSOEVER.

OTHER LEGAL RIGHTS

This warranty gives you specific legal rights, and you may also have 

other rights, which vary from state to state.

Summary of Contents for Smart Wand





















Reviews: