INSTALLATION
7
9. Remove the bottom hinge adaptor from
the freezer door. Move the adaptor to
the opposite side. Ensure it is securely
located.
10. Tilt the unit carefully. 2 people are
required to tilt the unit during the door
reversing process.
11. Remove the screws and bottom hinge.
Then remove the adjustable feet from
both sides and reattach them to the
opposite sides.
12. Remove the screw from the bottom
hinge and refit it to the opposite side.
Place the freezer door back on.
13. After placing the freezer door, screw the
middle hinge back onto the opposite
side of the unit.
Ensure the freezer door is aligned
horizontally and vertically, so that the
seals are closed on all sides before
finally tightening the hinge.
Underside view of the freezer door
screw
Insert
unscrew
Remove
unscrew
unscrew
unscrew
screw
unscrew
screw
Middle hinge
C155CW10_IB_final110316.indd 7
16/03/2011 6:02 PM