INSTALLATION
9
Levelling the Unit
To do this use the two levelling feet at the front of the unit.
If the unit is not level, the doors and magnetic seal
alignments will not be covered properly.
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm
water using a ‘wrung-out’ sponge or cloth. Wipe completely dry before replacing the shelves,
drawers and salad bin. Clean the exterior of the unit with a damp cloth.
If you require more information refer to the
Cleaning
section.
Before Using Your Unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is
working properly and to allow it time to fall to the correct temperature. Your unit should not
be overfilled.
•
Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the
unit.
•
Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs time
to settle.
C155CW10_IB_final110316.indd 9
16/03/2011 6:02 PM