24
Hints and Tips
PROBLEM
SOLUTION
No operation can
be performed with
the remote control.
• Check the batteries in the remote control. They may need
replacing.
• Operate the remote control at a distance of no more than
6m.
• Removes batteries and hold down one or more buttons
for several minutes to drain the microprocessor inside the
remote control to reset it. Reinstall batteries and try to
operate the remote control again.
Disc does not play. • Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
Disc Menu does
not appear.
• Check if the disc has a Menu.
No power
• Press the OPEN/CLOSE button on the DVD or on the
Remote Control to turn on the unit.
• Make sure the mains socket has power.
The picture is
distorted or turns
black and white
during colour
playback.
• The disc does not match with the TV colour system standard
(PAL/NTSC).
• The disc is dirty. Clean the disc.
• Sometimes a small amount of picture distortion may
appear. This is not a malfunction of the unit.
The screen aspect
ratio cannot be
changed.
• The Screen Aspect Ratio is fixed on your DVDs.
• Depending on the TV, it may not be possible to change the
Screen Aspect Ratio.
• This is not a problem with the DVD player.
No audio.
• Make sure you have securely connected the DVD player and
other devices.
• Make sure the TV and the amplifier are in good condition
and are setup properly.
Not able to select
some items in the
setup/ system
menu.
• Press the STOP button twice before selecting the setup/
system menu.
• Depending on the disc availability, some menu items
cannot be selected.
Summary of Contents for C1DVD11
