4. Re-fit the middle hinge on the left side.
Then clip on the bracket cover (to the
right hand side) and test that the cover
does not interfere with the opening and
closing of the door.
Ensure the freezer door is aligned
horizontally and vertically, so that the
seals are closed on all sides before finally
tightening the middle hinge.
5. Re-fit the upper door. Then, re-fit the top
hinge on the left side. Ensure the fridge
door is aligned horizontally and vertically
so that the seals are closed on all sides
before finally tightening the top hinge.
6. Use a spanner (not included) to tighten
the top hinge if necessary.
7. With the doors closed, check that the
doors are aligned horizontally and
vertically and that the seals are closed on
all sides before unclipping the bracket
cover.
Ensure the bracket cover is removed
before installing into any cabinetry.
INSTALLATION
8