INSTALLATION
9
Unscrew
Screw
Screw
6. Unscrew and remove the bottom hinge
pin, turn the bracket over and replace it.
7. Refit the bracket fitting the bottom hinge
pin. Replace both adjustable feet.
8. Place the door back on. Ensure the door
is aligned horizontally and vertically
so that the seals are closed on all sides
before finally tightening the top hinge.
9. Insert the hinge bracket and screw it to
the top of the unit.
10. Use a spanner to tighten it if necessary.
Summary of Contents for CTT50W12
Page 1: ...INSTRUCTION MANUAL TABLE TOP FRIDGE CTT50W12 ...
Page 2: ......