INSTALLATION
7
Levelling the Unit
To do this use the two levelling feet at the
front of the unit.
If the unit is not level, the door and magnetic
seal alignments will not be covered properly.
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm
water using a ‘wrung-out’ sponge or cloth. Wash the drawers in warm soapy water and dry
completely before replacing in the unit. Clean the exterior of the unit with a damp cloth.
If you require more information refer to the
Cleaning
section.
Before Using Your Unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is
working properly and to allow it time to fall to the correct temperature. Your unit should not
be overfilled.
•
Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the
unit.
•
Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs time
to settle.
CUF55W10_IB_final110512_door change.indd 7
12/05/2011 4:18 PM
Summary of Contents for CUF55W10
Page 2: ...CUF55W10_IB_final110512_door change indd 2 12 05 2011 4 18 PM ...
Page 17: ...CUF55W10_IB_final110512_door change indd 17 12 05 2011 4 18 PM ...
Page 18: ...CUF55W10_IB_final110512_door change indd 18 12 05 2011 4 18 PM ...
Page 19: ...CUF55W10_IB_final110512_door change indd 19 12 05 2011 4 18 PM ...