INSTALLATION
7
2. Position the covering cap on the opposite
side.
Reversing the Freezer Compartment Door Swing
1
2
3
Levelling the Unit
To do this adjust the two levelling feet at the
front of the unit.
If the unit is not level, the door and magnetic
seal alignments will not be covered properly.
1. Open the freezer compartment door a
little way. Using a small screwdriver, press
the spring in the opening of the lower
door bearing slightly upwards and take
the door bearing out complete with the
door.
3. Turn the freezer compartment door
through 180° and fit the lower door
bearing into the lower bearing cavity of
the freezer compartment door.
4. Lift the freezer compartment door a little
way upwards, fit it into the upper door
bearing, and at the same time insert the
lower door bearing into the square hole.
5. Small upward and downward
adjustments of the freezer compartment
door will make fitting easier.
180°
1
2
3
CUR50W12_IB_121121_RC_Pauline.indd 7
21/11/2012 11:27 AM