25
Hints and Tips
If a problem does occur, it may often be due to something very minor. The following table
contains some tips.
Problem
Solution
No power.
• Ensure the car power adapter or the mains adapter is
connected.
• Make sure that the unit is turned on.
• Make sure that you select ON mode.
The remote control does
not function.
• Use the remote near the unit.
• Point the remote at the remote sensor on the unit.
• Replace the battery in the remote with a new one.
• Make sure the plastic sheet has been removed from the
remote control.
• Remove any obstacles between the remote and the unit.
Very little or no sound is
coming from a DVD.
• Make sure the unit is not paused. Press the button.
• Make sure the unit is not in fast-forward or fast-reverse
mode. Press the button.
• Make sure the AUDIO/VIDEO input/output connections
are correct.
• The DTS DVD cannot be decoded to have speaker output.
• The unit has overheated. Shut it off for 30 minutes to
allow it to cool down.
• The volume control is located on the side of the unit -
please try adjusting this.
No picture.
The region number of the disc doesn’t match the region
number of this unit.
The picture is not clear.
• The DVD is dirty. Gently clean the disc.
• The disc is scratched.
• Please adjust the LCD’s brightness, contrast, hue and
saturation using the MODE button on the remote
control.
Loud hum or noise is
heard.
• The plugs and sockets are dirty. Wipe them with a cloth
slightly moistened with alcohol.
• Clean the disc.