3). Enter the old pin code using the numeric buttons(Default pin code is 6666).
4). Press the "UP" or "DOWN" cursor to select "New Pin Code" and enter 4 new
numbers with numeric buttons(0~9).
5). Press the "UP"or "DOWN" cursor to select "Enter Again", and enter the new pin
code again with numeric buttons(0~9).
6). Press the "OK" button to confirm the changed pin code.
Software Update
This menu allows users to update the software version.
1 Enter the System Setting menu, press the "UP" or "DOWN" cursor to highlight the
Software Update menu.
2 Press the "OK" button to enter the sub-menu,
Auto Mode:
1) Enter the software update menu, press the "UP" or "DOWN" cursor to highlight
Auto Mode.
2) Press the "OK" button to enter Auto Mode menu,
3) Press the "LEFT" or "RIGHT" cursor to set the status to "ON",
4) Press the "UP" or "DOWN" cursor to select Start Time. Use the numeric button to
enter the time in HH:MM mode.
5) Press the "OK" button to save the setting and quit, then the system will start auto
update at the set time.
Manual Mode:
1) Enter the Software Update menu, press the "UP" or "DOWN" cursor to highlight
Manual Mode.
2) Press the "OK" button to enter Manual Mode menu.
Status
Start Time
HH:MM
ON
Confirm
Exit
OK
EXIT
00: 00
Manual Mode
Auto Mode
Exit
EXIT
Searching...
Scan Progress:
Upgrade
Current Release:
537396505
Scan for Upgrade Now?
Cancel
Scan
14
14
12%
