Curtis DVD8009, User Manual

1

4

N

. Specifications

   Compatible DISC: VCD/DVD/CD/MP3
   Signal system: PAL/NTSC 
   Panel size: 7 inch
   Frequency response: 20 Hz to 20 kHz 
   Video output: 1 Vp-p/75 Ohm, unbalanced 
   Audio output: 1.4Vrms/10kOhm
   Audio S/N: Better than 80 dB 
   Dynamic range : Better than 85 dB
   Laser: Semiconductor Laser,  Wave Length: 650 nm/795 nm
   Power source: DC 9-12V 
   Power consumption: 10 W
   Operating temperature: 5~40°C 
   Weight : 0.791 kg
   Dimensions (W x D x H): 199.6 x 160.5 x 41.5mm
   Battery Type: Li Polymer

O. Troubleshooting

  PROBLEM  
No sound or 
distorted sound

Can't advance 
through a movie

The icon (      ) 
appears on 
screen

Picture is 
distorted

No forward or 
reverse scan

                                    SOLUTION
Make sure your DVD is connected properly. Make sure
all cables are securely inserted into the 
appropriate jacks.

You can't advance through the opening credits and 
warning information that appears at the beginning 
of movies because the disc is programmed to 
prohibit that action.

The feature or action cannot be completed at this time 
because:
1.  The disc's software restricts it.
2.  The disc's software doesn't support  the feature 
     (e.g., angles)
3.  The feature is not available at the moment.
4.  You've requested a title or chapter number that is 
     out of range.

  The disc might be damaged. Try another disc.
  It is normal for some distortion to appear during 
  forward or reverse scan.
  
  Some discs have sections that prohibit rapid 
  scanning or title and chapter skip.
  If you try to skip through the warning information 
  and credits at the beginning of a movie, you won't be 
  able to.  This part of the movie is often programmed 
  to prohibit skipping through it.

DESIGN

AND

SPECIFICATIONS

ARE

SUBJECT

TO

CHANGE

WITHOUT

NOTICE