Curtis GEMSIF10A1000, User Manual

Non-Brew Programming Menu (cont.)

Brew Count Total - 

when accessed, displays the total brew cycles on the brewer. It cannot be reset. The 

display returns to the previous screen automatically after a few seconds. 

Cold Brew Lock - 

adjusts the temperature at which the brewer will brew coffee when the BREW button is 

pressed (

Ready to Brew

BQQFBSTPOUIFEJTQMBZ5IFGBDUPSZEFGBVMUTFUUJOHJT' ¡$CFMPXUIFXBUFSUBOL

temperature setting. This feature also adjusts the temperature at which the heating element turns on to reheat 

UIFXBUFSJOUIFUBOL5IFBWBJMBCMFTFUUJOHTBSF¡'¡' ¡$BOE0GG0ODFBDDFTTFEQSFTT

Ż

 or 

Ź

 to 

choose the desired setting. Then press 

~

to set and exit. 

Master Reset -  

resets the brewer universal control module (UCM) to the factory default settings. Once 

accessed, “Are You Sure?” will appear on the display. Press 

Ż

 for Yes or 

Ź

 for No.

Service Call - 

sets the service phone number that appears on the display when the UCM detects a SENSOR 

ERROR or WATER ERROR . Once accessed, press 

Ż

 or 

Ź

 to choose the number to be changed. Then press 

~

 repeatedly 

to change the number value. Press 

Ż

 or 

Ź

 to choose the next number to change or choose exit 

and press 

~

.

Access Code - 

sets the access code entered to access programming mode. The factory default is 1-2-3-4. 

Once accessed, press 

Ż

 or 

Ź

 to choose the number to change. Then press 

~

repeatedly

to change the 

number value (the range is 1 to 4). Press 

Ż

 or 

Ź

 to choose the next number to change or choose exit and  

press 

~

.

Banner Name - 

changes the company name that appears on the display. The factory default is 

Curtis

. No 

name appears when all blanks are entered. Once accessed, press 

Ż

 or 

Ź

 to choose the letter to change. 

Then press 

~

 repeatedly 

to change the number value. Press 

Ż

 or 

Ź

 to choose the next number to change or 

choose ex and press 

~

to exit.

Warmer Auto-Off - 

(GEMS, GEMT, GEMSIF, GEMTIF models) adjusts the length of time that elapses before 

the dispenser warmer shuts off automatically. This function takes priority over the quality timer. The factory 

EFGBVMUTFUUJOHGPS(&.4*'(&.5*'JTIPVST'PS(&.4(&.5UIFEFGBVMUJTiEJTBCMFEw5IFTFUUJOHSBOHFJT

1 to 12 hours. Once accessed, press 

Ż

 or

Ź

 to adjust the number of hours. Then press 

~

to set and exit.

P-Maintenance - 

turns on/off and adjusts the P-Maintenance (preventive maintenance) brew monitor. 

The factory default setting is Off. When On, the UCM measures the number of gallons brewed before the 

1.BJOUFOBODFSFNJOEFSBQQFBSTPOUIFEJTQMBZ5IFTFUUJOHSBOHFJTUPHBMMPOT MJUFST0ODF

accessed, press 

Ż

 or 

Ź

 to choose the desired setting, then, press 

~

to exit.

Beeper On/Off - 

turns the beeper that is heard each time a button is pressed on or off. The factory default 

setting is On. Once accessed, press 

Ż

 or 

Ź

 to choose the desired setting. Then, press 

~

to exit.

Drip-out Mode - 

TFUTUIFESJQPVUNPEFUJNFS"GUFSXBUFSTUPQTnPXJOHJUBMMPXTBEEJUJPOBMUJNFGPSUIFDPGGFF

to drain from the brew basket before the brew basket lock releases. The factory default is 2 min. This feature 

SFEVDFTUIFDIBODFUIBUUIFCSFXCBTLFUXJMMCFSFNPWFEUPPFBSMZ5IFTFUUJOHSBOHFJTUPNJOVUFT0ODF

accessed, press 

Ż

 or 

Ź

 to choose the desired setting, then, press 

~

to exit.

Warmers Default - 

(Gemini models) sets the warmer temperature. The factory default setting is MED. The 

BWBJMBCMFTFUUJOHTBSF0GG)*() '¡$.&% '¡$PS-08 '¡$0ODFBDDFTTFE

press 

Ż

 or 

Ź

 to choose the desired setting,  then press 

~

. On twin brewers 

press 

Ż

 or 

Ź

 to choose the 

desired setting for the second warmer, then press 

~

. 

Press 

~

 to exit.  

*Off option not available on GEMX series models.  

(&.*'BOE(&.9POMZCBTFEPOBCSFXUFNQFSBUVSFPG¡' ¡$

         continued... 

PROGRAMMING GUIDE 

PG2

8$130(3"..*/((6*%&ø

H