Curtis iP1002M, Owner'S Manual

8

Operations

How to using radio

1.

 Plug the AC Power cord into a power outlet and press the POWER button.

2.

 If necessary, press the RADIO/AUX button to radio mode.

3.

 Press the BAND button to switch between AM / FM radio station. 

4.

 Automatic Tuning - Press and hold the TUNING UP or DN buttons until the 

display begins to move, then release the buttons. The tuner will scan up or down 
the band until it finds the first strong station, and then stop on that station. Repeat 
this process until the tuner stops on your desired station. 

5.

 Manual Tuning - Press and release the TUNING UP or DN buttons repeatedly 

until the display is showing the frequency of your desired station. Use the manual 
tuning method to tune to weaker stations that are bypassed during Automatic 
Tuning. 

Antennas

AM - If reception is weak, turn the unit to improve reception. FM - If 

reception is weak, adjust FM Rod Antenna length and the angle to improve 
reception.

Programming radio station presets

You can program as many as 10 FM and 10 AM radio station presets.

1.

 During power on mode, press RADIO/AUX button to select AM/FM band.

2.

 Press the TUNING UP/DN buttons to desire station you want store.

3.

 Press and hold the MEM/CLK SET button to activate the programming mode. 

4.

 Press the TUNING UP/DN buttons to select the preset number you want to 

store.

5.

 Press and hold the MEM/CLK SET button to store the station.

6.

 Repeat Steps 2 through 5 to program additional presets.