PROGRAMMING GUIDE
PG12
1$(5130(3"..*/((6*%&ø
/$
Programming Options (cont.)
Dispense Total
1, 2
-
when accessed, displays the total dispense cycles on the unit. It cannot be reset. The
display returns to the previous screen automatically after a few seconds. Press
Ź
to continue to the next
menu.
Language
1, 2
-
DIBOHFTUIFMBOHVBHFUIBUBQQFBSTPOUIFEJTQMBZ UIFGBDUPSZEFGBVMUJT&OHMJTI1SFTT
~
to access. Press
Ż
or
Ź
to choose the desired setting, then press
~
to exit. Press
Ź
to continue to the next
menu.
Valve Calibrate
1
-
QPVSTXBUFS POMZGSPNUIFTQPVUGPSTFDPOETUPBMMPXUIFEVNQWBMWFTUPCF
calibrated. See
Dump Valve Calibration
in the
Troubleshooting Section
for the complete dump valve calibration
procedure. Press
~
to access. The bottom portion of the display will read “Select Station”. Place an empty
measuring cup under the dispensing spout for the valve to be calibrated. Press the PUSH button above the
DVQ8BUFSXJMMEJTQFOTFGPSTFDPOET1SFTT
~
UPNFBTVSFnPXSBUFGPSBEJGGFSFOUWBMWFPSQSFTT
Ź
to
continue to the next menu.
Model Select
1, 2
-
changes the model number. The unit must be set to the proper model number for proper
operation. Press
~
to access. Press
Ż
or
Ź
until the model number matching the model number label on the
unit appears, then press
~
to exit. Press
Ź
to continue to the next menu.
1 Not present on Pre-Set Dispense models
2 Not present on PCGT6 series models
