background image

MODEL: RCD836

PHONOGRAHPH WITH

AM/FM RADIO, CASSETTE & CD PLAYER

1

IMPORTANT SAFETY INSTRUCTIONS FOR 

AUDIO PRODUCTS-READ THOROUGHLY

When using electrical  products, basic precautions  should always be followed including:

1. Read Instructions -

 All the safety and operating instructions should be read before the 

product is operated.

2. Retain Instructions 

- The safety and operating instructions should be retained for future 

reference.

3. Heed Instructions 

- All warnings on the product and in the operating instructions should 

be adhered to.

4. Follow Instructions

 - All operating and user  instructions should be  followed.

5. Cleaning 

- Unplug this product from the wall outlet before cleaning. Do not use liquid 

cleaners or aerosol  cleaners. Use a damp cloth for cleaning.

6. Attachments

 - Do not use attachments not recommended by the product manufacturer

as they may cause hazards.

7. Water and Moisture

 - Do not use this product near water-for example, near a bath 

tub,wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool,
etc.

8. Accessories

 - Do not place this product on an unstable cart, stand, tripod, bracket, or 

table. The product may fall, causing serious injury to a child or adult, and serious damage to 
the product. Use only with a cart, stand, tripod, bracket, or table recommended by the 
manufacturer, or sold with the product. Any mounting of the product should follow the 
manufacturer's instructions, and should use a mounting accessory recommended by the 
manufacturer.

9. Transporting

 - A product and cart combination should be moved with care. Quick stops, 

excessive force, and uneven surfaces may cause the product and cart combination to 
overturn.

10. Ventilation 

- Slots and openings in the cabinet are provided for ventilation, to ensure

reliable operation of the product and to protect it from overheating. These openings must 
not be blocked or covered. The openings should never be blocked by placing the product on 
a bed, sofa, rug, or similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the 
manufacturer's instructions have  been adhered to.

11. Power Sources

 - This product should be operated only from the type of power source 

indicated on the marking label. If  you are not  sure of the type of power supply to your  home, 
consult your product dealer or local power company. For products  intended to operate from 
battery power, or other sources, refer to  the operating instructions.

12. Grounding or Polarization

 - This product may be equipped with a polarized 

alternating-

current line plug (a plug having one blade wider than the other). This plug will 

fit into the  power outlet only one way. This is a safety feature. If you are unable to insert the 
plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your  
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized 
plug.

13. Power-Cord Protection

 - Power-supply cords should be routed so that they are not 

likely to be walked on or pinched  by items placed upon or against them, paying particular 
attention to cords at plugs, convenience receptacles, and the point where they exit from the 
product.

          OPERATION MANUAL

Summary of Contents for RCD836









Reviews: