Curtis RCD869, Instruction Manual

9

Radio

Operation

At the front of the CD micro system, or using
the remote control, press STANDBY, to
switch the CD micro system on. The LCD
display will light up.
Press either the FUNCTION button on the
remote control or the TUNER button on the
unit to select the radio tuner.

Tuning

Press either STOP/BAND on the remote
control or STOP/BAND on the unit to select
between FM and 

AM

 bands.

Use the tuning buttons on the remote control
or on the unit to select the desired station.
The frequency will display on the LCD
display.
Pressing any of the tuning buttons briefly
will change the frequency by one increment.
Pressing and holding the button for a couple
of seconds will cause the tuner to search
for the next radio station.
Pressing any of the tuning buttons during a
search will stop the search.

FM

FM Antenna

Fully extend the FM antenna wire and
position it to obtain the best FM reception.

FM Stereo

The CD micro system is capable of receiving
stereo FM broadcasts. When you are tuned
to a stereo broadcast, ‘STEREO’ will be
displayed.

AM

AM

 Loop Antenna

For 

AM

 reception broadcasts are picked

up through a loop antenna that plugs into
the back of the unit

.

The antenna assembly has a fixing system
attached that can be folded to form either a
stand or wall mounting as shown in the
figures opposite. The wall mounting has two
holes for round head screws. These are
not supplied.

Folded to
form a
stand

As supplied

Note: It is normal for the position of the

antenna to be adjusted to achieve the
best reception. If selecting the wall
mounted option ensure that you can
receive the radio stations you listen to
before fixing.

Folded for
wall
mounting