Power Up the Brewer
15 Turn on the water supply valve.
16 Make sure that the circuit breaker(s) supplying power
to the unit is on.
Turn the main power toggle switch on the bottom of
the urn control box to the ON position. When you turn
the toggle switch ON, the water jacket will start to
mMM5PFYQFEJUFmMMJOHZPVNBZPQFOUIFFNFSHFODZ
SFmMMWBMWFMPDBUFEPOUIFCBDLPGUIFDPOUSPMQBOFM
8IJMFUIFUBOLJTmMMJOHJOTQFDUUIFXBUFSTVQQMZMJOFT
GPSMFBLT%VSJOHUIFJOJUJBMXBUFSUBOLmMMUIFJOJUJBM
CSFXBOEXIFOFWFSUIFmMUFSJTSFQMBDFEZPVNBZ
IFBSUIFTPVOETPGBJSCFJOHQVSHFEGSPNUIFmMUFS
and water supply tubing.
8IFOUIFXBUFSKBDLFUIBTmMMFEUVSOPOUIF
thermostat by turning the dial clockwise to the
desired setting. Depending on the water temperature
BOEUIFFMFDUSJDBMTQFDJmDBUJPOTUIFXBUFSUZQJDBMMZ
requires 50 to 60 minutes to reach operating
temperature. The thermostat indicator will light as
the unit heats and turns off when the unit is at brew
temperature.
INSTALLATION INSTRUCTIONS
II7
36"650."5*$*/45"--"5*0/*/4536$5*0/4ø
/$
IMPORTANT:
When operating the unit at higher
elevations, reduce the operating temperature by
2°F for each 1000 feet of elevation above 4000
feet. See
Thermostat Adjustment
in the
TROUBLESHOOTING GUIDE
.
Main power switch
(under control box)
Thermostat
NOTICE:
Do not forget to close the emergency
SFmMMWBMWFPODFUIFXBUFSKBDLFUIBTmMMFE