J. Deleting Message Waiting Indication
1.
Press and hold the
Voice Mail/Func
button to enter the menu.
2.
Press the
0
button to go to the MESSAGE WAITING programming option.
3.
Press the
Flash/Edit
button to reset the Message Waiting Indication.
“DEL” will begin flashing.
4.
Press and hold the
Re/Pa/Save
button to delete the indication. A long
“beep” will sound to confirm the setting has been saved.
5.
Continue with programming or press the
Voice Mail/Func
button to return
to STANDBY mode.
K. Setting the Area Code
1.
Press and hold the
Voice Mail/Func
button to enter the menu.
2.
Press the
*
button to go to the AREA CODE programming option.
3.
Press the
Flash/Edit
button to change the setting. “000” will begin
flashing.
4.
Press the TELEPHONE KEYPAD
1
to
0
buttons to enter the three digit area
code for your phone number.
5.
When the desired setting is displayed, press and hold the
Re/Pa/Save
button to save the setting. A long “beep” will sound to confirm the setting has
been saved.
6.
Press the
Voice Mail/Func
button to return to STANDBY mode.
NOTE:
Do not use the AREA CODE programming if you are required to dial 10 digits
(XXX-XXX-XXXX) to dial a local number.
Caller ID System Operation
26