2.
To answer the call, pick up the handset and begin to speak. After several seconds
the call timer will begin keeping track of the elapsed time for the phone call.
When you have finished your call, place the handset back in the base to hang up.
Review the incoming call messages (up to 80 sets)
Press
Review Left Up [
] Key or Review Right Down[
] Key repeatedly to review the last
sets of incoming call message. (such as phone number, date and time of the call)
Review the outgoing call messages (9-30 sets)
Press OUT Key repeatedly to review last 9-30 sets of outgoing call messages (such as
the phone number)
Flash
When accessing telephone services, such as call waiting, use the [FLASH] key rather
than the hook switch to access the other call.
The [Flash] key automatically sends the correct signal and duration, no matter how
long the key is pressed.
New Call indicator
When new caller ID information has been received. The new call indicator will being to flashing.
SPEED DIAL OPERATION
Storing speed dial
1.
While continuously holding down the hook switch or when the telephone line cord
is disconnected
2.
Dial the number you wish to dial (the display can be show up to 12 digits) using
the digital keys or review the incoming or outgoing number.
3.
Press <STORE> once.
4.
And then press digital<0-9 key> to store the number in the location which you
desire to store in.
Note:
there is a time-out for storing numbers, if the times out before the number is
stored, try again please.
MAKING A SPEED DIAL CALL
