![background image](http://html.mh-extra.com/html/curtiss-wright/champ-av8/champ-av8_hardware-user-manual_2700339159.webp)
CHAMP-AV8 (VPX6-462) H
ARDWARE
U
SER
’
S
M
ANUAL
C
URTISS
-W
RIGHT
B-4
P
ROPRIETARY
826448 V
ERSION
5 M
ARCH
2015
Table Note 1: The memory is write-protected if the stated condition is met.
Table Note 2: A software procedure must be performed to initiate the configuration before the
jumper setting can take affect.
Serial Flash
(4 devices)
4 Mbit
Non-volatile
Contains configuration
settings for the 82574
Ethernet controllers
Yes
The memory is pro-
tected if jumper (or
wire-wrap) JB4 is
NOT installed.
RTM SW12 must be
Off
Backplane NVRMO
signal must be logic
High.
None
EEPROM Dip
Switch
24 bits
Non-volatile
Board configuration
Yes
The memory is pro-
tected if jumper (or
wire-wrap) JB4 is
NOT installed.
RTM SW12 must be
Off
Backplane NVRMO
signal must be logic
high
None
DDR3
SPD
EEPROM
(4 devices)
4kbit
Non-volatile
Contains DDR3 configu-
ration settings
Yes
The memory is pro-
tected if jumper (or
wire-wrap) JB4 is
NOT installed.
RTM SW12 must be
Off
Backplane NVRMO
signal must be logic
High
None
Table B.1:
Memory Devices Available On The CHAMP-AV8 (Continued)
Memory Type Size
Volatility
Function
Accessible
from CPU
Write-protection
(Note 1)
Process to
Clear
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com