Chapter 2 Operation
User Manual, MAR-5915-3x
Page 22 of 39
MNL-0659-01 Rev A7
ECO-5592
05 Feb 19
Grounding
The bottom of the baseplate is conductive to allow the system to be grounded via the baseplate.
A blind grounding hole for attachment of a grounding cable using a #1/4-20 bolt is provided on the
rear of each ring of the system (Figure 5. Rear View).
It is recommended that you use only one grounding hole. Choose the grounding hole that allows
the shortest grounding cable length.
Caution! The grounding lug tie holes are shallow
(0.375”).
Select the proper screw length for your grounding application and avoid over-tightening.
Figure 5. Rear View
.375”